康桥一梦 2019-10-11 13:41:33
Description: The energy conservation between layers of single cell, i.e. the heat transfer model of fuel cell stack, is simulated. The algorithm is Runge-Kutta method of fourth-fifth order: the abscissa is the thickness of single cell, the longitudinal coordinate is the temperature, and the simulation time is 1000s.
Plat: matlab | Size: 1KB | Downloads: 0
gosong 2019-08-21 09:53:54
Description: The program is very simple, but it is still useful for hydropower plants, mainly for the same circle adjustment and the conversion of wafer errors.
Plat: MathCAD | Size: 438KB | Downloads: 0
xaofen 2019-08-14 14:31:40
Description: Jiangsu 645 Protocol Simulated Main Station
Plat: C++ Builder | Size: 2403KB | Downloads: 2
王昙 2019-08-06 10:34:58
Description: 12-pulse rectification model to simulate and verify the relationship between turn-off angle and commutation inductance
Plat: matlab | Size: 22KB | Downloads: 1
tanhang 2019-08-03 21:58:49
Description: Through the Simulink turbine program provided by matlab, the routine has been changed, some parameters have been adjusted, and borrowing has been added to imitate the primary frequency regulation process of the hydro-generator set. It is worth learning from.
Plat: matlab | Size: 33KB | Downloads: 4
ceykhu 2019-08-02 17:28:38
Description: A quasi-Newton method is used to find a set of real solutions of the nonlinear equations.
Plat: Fortran | Size: 834KB | Downloads: 1
xiguatailang 2019-08-01 14:20:06
Description: Calculation Model of Induced Voltage and Current of Gaoyan Overhead Transmission Line by ATP/EMTP
Plat: Others | Size: 5KB | Downloads: 2
sangeeta1472 2019-07-23 17:05:28
Description: Wind turbine simulation
Plat: LabView | Size: 1108KB | Downloads: 2
lzback 2019-07-22 13:36:07
Description: model of CAES of simulink
Plat: matlab | Size: 37KB | Downloads: 3
流行主教 2019-07-17 19:47:25
Description: An all-DC offshore wind farm with series-connected turbines
Plat: C/C++ | Size: 2255KB | Downloads: 2
千寻1997 2019-07-17 16:30:10
Description: 100kW photovoltaic power supply is connected to 25kV distribution network
Plat: matlab | Size: 61KB | Downloads: 4
nick6000 2019-07-11 13:19:15
Description: MATPOWER is a package of free, open-source Matlab-language M-files for solving steady-state power system simulation and optimization problems, such as: power flow (PF), continuation power flow (CPF), extensible optimal power flow (OPF), unit commitment (UC) and stochastic, secure multi-interval OPF/UC. It is intended as a simulation tool for researchers and educators that is easy to use and modify. MATPOWER is designed to give the best performance possible while keeping the code simple to understand and modify.
Plat: matlab | Size: 32074KB | Downloads: 0
zoiasuss 2019-07-10 16:56:57
Description: use DC Method to do the contingency analysis. be able to use test case from MATPOWER in matlab (download case file fisrt)
Plat: matlab | Size: 2KB | Downloads: 0
c1anid 2019-07-09 19:10:17
Description: power system stabilizer
Plat: matlab | Size: 39KB | Downloads: 0
合纵连横 2019-07-06 16:59:56
Description: Hydraulic model and thermal model are considered simultaneously in the thermal system, and Newton Raphson algorithm is used to solve them jointly.
Plat: matlab | Size: 1KB | Downloads: 1
合纵连横 2019-07-06 16:57:20
Description: Hydraulic model and thermal model are considered simultaneously in the thermal system, and Newton Raphson algorithm is used to solve them.
Plat: matlab | Size: 1KB | Downloads: 1
合纵连横 2019-07-06 16:55:01
Description: The multi-energy flow model of cogeneration system is established, and the extended Newton-Raphson decomposition method is used to calculate the multi-energy flow.
Plat: matlab | Size: 1KB | Downloads: 1
合纵连横 2019-07-06 16:52:52
Description: The joint thermal-electrical modeling of regional integrated energy system is solved by using the extended Newton-Raphson algorithm, and the state parameters of the thermal system and the power system in the system are obtained.
Plat: matlab | Size: 2KB | Downloads: 15
合纵连横 2019-07-06 16:46:12
Description: The multi-energy flow model of cogeneration system is modeled and calculated by the unified method of extended Newton-Raphson algorithm.
Plat: matlab | Size: 2KB | Downloads: 3
Robbin_Feng 2019-07-05 11:11:00
Description: a power system optimized calculation program is performed under the condition of minimum cost objective function, and the constraints include maximum and minimum output, network constraints and climbing constraints.
Plat: matlab | Size: 13KB | Downloads: 6
多福多寿? 2019-06-26 20:28:16
Description: An IEEE118-node example based on BPA
Plat: C/C++ | Size: 5KB | Downloads: 1
封平 2019-06-26 13:54:05
Description: solve power system economic dispatch problem by Nested PSO algorithm
Plat: matlab | Size: 7KB | Downloads: 7
封平 2019-06-26 13:52:09
Description: solve power system economic dispatch problem by PSO algorithm
Plat: matlab | Size: 4KB | Downloads: 7
木玉s 2019-06-24 10:59:25
Description: Accurate and Approximate PP Wave Reflection Coefficient for AVO Prestack Inversion in Petroleum Exploration
Plat: matlab | Size: 1KB | Downloads: 2
LainNietoGomez 2019-06-19 00:15:11
Description: solver of 1DOF system
Plat: matlab | Size: 808KB | Downloads: 0
LainNietoGomez 2019-06-19 00:13:11
Description: Introduction to the wind turbines
Plat: matlab | Size: 378KB | Downloads: 0
LainNietoGomez 2019-06-19 00:10:16
Description: Diferential equations
Plat: matlab | Size: 643KB | Downloads: 0
macgicnan 2019-06-13 03:49:50
Description: vumat subrountine for abaqus explicit ,the hill parameter is to set 0.5 and 1.5 by default.
Plat: Fortran | Size: 3KB | Downloads: 3
ltnnn 2019-06-11 10:51:49
Description: Simulation of Independent DC Distribution Power System Four Generators Running with Rectifier Load Including self-built governor
Plat: matlab | Size: 73KB | Downloads: 2
Pancras.Liu 2019-06-04 19:30:27
Description: C Language Programming Fourth Order Runge-Kutta Method for Solving Second Order Ordinary Differential Equations
Plat: C/C++ | Size: 8KB | Downloads: 0
Tags: